8-Channel Monitor Eight Channel Vibration Monitoring

8-Channel Monitor Eight Channel Vibration Monitoring　

Product model: 8-Channel Monitor

Country of origin: Canada Instantel

Company use:

1. Two three-component geophones and two microphones are connected to the same monitor.

2.8 user programmable channels are available for advanced monitoring applications.

3.Blastware software is fully supported and can be easily set and operated.

4. Use the Blastware Compliance Module software for full sample rate flexibility - 1,024S/s, 2,2048S/s, and 4,096S/s.

Use the Blastware Advanced Module software - 65,000 S/s.

Product introduction: Single monitor, two adaptive settings For those multiple monitoring points that need to be placed very close together, the 8-channel Blastmate III and Minimate Plus multi-sensor vibration monitors provide a flexible and cost-effective solution. The 8-channel system is built on the powerful 4-channel III Series platform, allowing you to connect two three-component geophones and two microphones to a single monitor. This allows you to easily and economically install in two completely independent monitoring positions. Together with the conversion function of the Instantel Blastware Advanced Module software, event data can be collected and the natural frequency of the building or structure can be determined without the need for another instrument. Because the Blastware software fully supports 8-channel systems, the entire setup process is as simple as setting up a standard 4-channel monitor.

For more demanding monitoring applications, the Blastware Advanced Module software can monitor a wide range of vibration and overpressure sensors as well as related structural and environmental measurement sensors. Vibration, ambient conditions, and structural cracking activity were monitored at the same time using the same Instantel monitor. Not only do you have all of these, you can still fully own all the powerful features of the III Series, such as the Instantel Histogram ComboTM monitoring mode, zero stop time between events, and flexible sampling rates up to 65,000 S/s, depending on what you activate. The number of channels depends. These allow you to control reliable monitoring under almost any condition and give you enough confidence. The main function is to connect two three-component geophones and two microphones on the same monitor. 8 user programmable channels can be used for advanced monitoring applications. Blastware software is fully supported. It can be easily set and operated using Blastware Compliance Module software. Rate flexibility - 1,024S/s, 2,2048S/s, and 4,096S/s. Use the Blastware Advanced Module software - 65,000 S/s.